Kingston Memory KSM26RS8 8MEI 8GB 2666MHz DDR4 ECC Reg CL19 DIMM 1Rx8 Micron E IDT Retail Online Hot Sale
Description
Kingston s KSM26RS8 8MEI is a 1G x 72-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM) registered w parity, 1Rx8, ECC, memory module, based on nine 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features
o Power Supply: VDD equal 1.2V
o VDDQ equal 1.2V
o VPP equal 2.5V
o VDDSPD equal 2.25V to 2.75V
o Functionality and operations comply with the DDR4 SDRAM datasheet
o 16 internal banks
o Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
o Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600
o Bi-Directional Differential Data Strobe
o 8 bit pre-fetch
o Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
o Supports ECC error correction and detection
o On-Die Termination (ODT)
o Temperature sensor with integrated SPD
o This product is in compliance with the RoHS directive.
o Per DRAM Addressability is supported
o Internal Vref DQ level generation is available
o Write CRC is supported at all speed grades
o CA parity (Command Address Parity) mode is supported
CL(IDD)
19 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
AUR
UL Rating
94 V – 0
Operating Temperature
0o C to +85o C
Storage Temperature
-55o C to +100o C
Item Dimension (L xW xH )
3 x 7 x 1
Weight
1 lb
Warranty Information
Lifetime Manufacture Warranty
Additional Information
| Title | Default Title |
|---|
