Description

Kingston s KSM24ES8 8ME is a 1G x 72-bit (8GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8, ECC, memory module, based on nine 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

o Power Supply: VDD = 1.2V Typical

o VDDQ = 1.2V Typical

o VPP = 2.5V Typical

o VDDSPD = 2.2V to 3.6V

o Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

o Low-power auto self refresh (LPASR)

o Data bus inversion (DBI) for data bus

o On-die VREFDQ generation and calibration

o Single-rank

o On-board I2 serial presence-detect (SPD) EEPROM

o Temperature sensor with integrated SPD

o 16 internal banks 4 groups of 4 banks each

o Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

o Selectable BC4 or BL8 on-the-fly (OTF)

o Fly-by topology

o Terminated control command and address bus

o PCB: Height 1.23 (31.25mm)

o RoHS Compliant and Halogen-Free

CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
46.16ns(min.)
Refresh to Active Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
TBD W^{NOTE
UL Rating
94 V – 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
NOTE
Power will vary depending on the SDRAM used.}